Home > Energy Efficiency Lab >

Water Efficiency Grades Energy Efficiency Lab For Reverse Osmosis Drinking Water Treatment Purifiers

Product Categories

Electrical Appliance Testing Equipment [365]
Energy Efficiency Lab [43]
Vehicle Testing Equipment [134]
Battery Testing Equipment [66]
Switch Life Tester [269]
Led Testing Equipment [70]
Water Ingress Testing Equipment [82]
Environmental Test Chamber [103]
Flammability Test Chamber [60]
EMC Test Equipment [24]
Medical Device Testing Equipment [34]
IEC 62368 Test Equipment [73]
Test Equipment For Electric Lab [22]

Sinuo Testing Equipment Co. , Limited

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Water Efficiency Grades Energy Efficiency Lab For Reverse Osmosis Drinking Water Treatment Purifiers

Name: Water Efficiency Grades Energy Efficiency Lab For Reverse Osmosis Drinking Water Treatment Purifiers
Brand: Sinuo
Price: 1 USD

Buy cheap Water Efficiency Grades Energy Efficiency Lab For Reverse Osmosis Drinking Water Treatment Purifiers product

Brand Name : Sinuo

Model Number : SN338

Certification : Calibration Certificate (Cost Additional)

Place of Origin : China

MOQ : 1

Price : Tailored

Payment Terms : T/T

Supply Ability : 1 Set Per Month

Delivery Time : 2 Months

Packaging Details : Plywood

UUT : R.O. water purifiers

Test station : 2

Inlet Water Temperature : 25±1℃

Inlet Water Pressure : 0.24±0.02Mpa

Water Flow : 0～100L/H

Test Standard : GB34914-2017, QBT 4144 and etc.

Contact Now

Water Efficiency Grades Test System for Reverse Osmosis Drinking Water Treatment Purifiers

Overview:

Water efficiency grades test system for reserve osmosis drinking water treatment purifiers is designed and manufactured according to GB34914-2017, QBT 4144 and etc. Under the conditions of the test water is well prepared, the water temperature and pressure are well set, the test system measures the total water inlet capacity, total water production capacity, total concentrated water capacity, purified water flow rate and purified water production rate of the drinking water treatment purifiers, to obtain the water efficiency grades of the drinking water treatment purifiers.

Standards:

Can be designed according to the following standards:

► GB34914-2017

► QBT 4144

► Other international standards

Types of UUT :

Reverse Osmosis Drinking Water Treatment Purifiers

Technical Contents:

Total water inlet

Total water production capacity

Total concentrated water

Purified water flow rate

Purified water production rate

Technical Parameters:

No.:	Name	Specification
1	Test station	2 or customized
2	Test medium	The following water quality indicators were configured with pure water (conductivity <10 μS/cm, total dissolved solids <5 mg/L) as follows: a. total hardness should be controlled at (250 ± 20) mg / L; b. alkalinity should be controlled at (160 ± 20) mg / L; c. total dissolved solids should be controlled at (500 ± 50) mg / L; d. pH should be controlled at 7-7.5
3	Inlet water temperature	25±1℃
4	Inlet water pressure	0.24±0.02Mpa
5	Water flow	0～100L/H

Product Tags:

temperature humidity test chamber

energy efficiency lab test equipment

Water Efficiency Grades Energy Efficiency Lab For Reverse Osmosis Drinking Water Treatment Purifiers Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Sinuo Testing Equipment Co. , Limited
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!