Home > Switch Life Tester >

Rubber Cables Flexing Test Apparatus IEC 60227.2 Figure 1 0.33m/S

Product Categories

Electrical Appliance Testing Equipment [365]
Energy Efficiency Lab [43]
Vehicle Testing Equipment [134]
Battery Testing Equipment [66]
Switch Life Tester [269]
Led Testing Equipment [70]
Water Ingress Testing Equipment [82]
Environmental Test Chamber [103]
Flammability Test Chamber [60]
EMC Test Equipment [24]
Medical Device Testing Equipment [34]
IEC 62368 Test Equipment [73]
Test Equipment For Electric Lab [22]

Sinuo Testing Equipment Co. , Limited

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Rubber Cables Flexing Test Apparatus IEC 60227.2 Figure 1 0.33m/S

Name: Rubber Cables Flexing Test Apparatus IEC 602272 Figure 1 033mS
Brand: Sinuo
Price: 1 USD

Buy cheap Rubber Cables Flexing Test Apparatus IEC 60227.2 Figure 1 0.33m/S product

Brand Name : Sinuo

Model Number : SN2302

Certification : Calibration Certificate (Cost Additional)

Place of Origin : China

MOQ : 1

Price : Customized

Payment Terms : L/C, T/T, Western Union, MoneyGram

Supply Ability : 20 Sets Per Month

Delivery Time : 30 days

Packaging Details : Plywood

Applied Standard : IEC 60227.2, IEC 60245.2, etc.

Applied UUT : Rubber plastic wires and cables

Test Station : Single station

Load Current : 0.5~25A adjustable

Testing Distance : 1000±20mm

Load Voltage : L-L 10~400V adjustable

Testing Speed : 0.33m/S

Suitable Cores : 2-18

Contact Now

Rubber Cables Flexing Test Apparatus IEC 60227.2 Figure 1 0.33m/S

Equipment overview:

The test machine is designed and manufactured according to standard IEC 60227.2 Clause 3.1 Figure 1, IEC 60245.2 Clause 3.1 Figure 1, IEC60245-1 clause 5.6.3.1 and etc. It complies with the relevant standard requirements of rubber plastic wires’ and cables’ mechanical strength flexing test. This test does not apply to flexible cables with cores of nominal cross-sectional area greater than 4mm2 and cables having more than 18 cores laid up in more than two concentric layers.

The test apparatus can meet the standard test requirements of the domestic and international standards, can be widely used. It has precision digital meter, thus, can accurately measure the smaller or larger current voltage. The change method for pulleys is simple and convenient. The test equipment adopts to chain drive mechanism, the performance is stable and the noise is rare.

Technical Characteristics:

Power Supply	3 phase 5 wires 220VAC/ 60 Hz or 380V/50Hz
Load Current	0.5~25A, adjustable
Load Voltage	Line-to-line voltage 10~400V adjustable
Testing speed	0.33m/s
Testing distance	1000±20mm
Suitable cores	2-18
Nominal cross-sectional area	0.2~4mm²
Diameter of pulleys	60, 80, 120, 160, 200mm
Test weights	20.5kg with hook, 20.5kg with hole, 61kg with hole, 26kg with hook

How to installand adjustof the pulleys?

Choose the corresponding pulleys according to the test wire/cable diameter and wire/cable core numbers.
Installation: Loosen and remove the fixing nut, pull out the pulley, after replacing the pulley, then install the fixing nut and fasten it.
Adjustment: Release the screws of 1, 2, A, B pulleys, then adjust pulleys’ positions, to make segments of the sample are horizontal and parallel to each others. Shown as below pictures:

Product Tags:

IEC 60227.2 Flexing Test Apparatus

0.33m/S Flexing Test Apparatus

Rubber Cables Flexing Test Apparatus IEC 60227.2 Figure 1 0.33m/S Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Sinuo Testing Equipment Co. , Limited
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!